Personal and expert advice
25 years of experience
Fast delivery times
Competitive prices
Nederlands 
Deutsch 
Français 
| Delivery time | Request a quote |
| In stock | Yes, 40 pcs |
| Article number | 644 |
| EAN | 9504712769534 |
| Color | Gold |
| Connection | Tulle x DN (M) |
| Connection size | 75mm |
| Diameter Hose | 75 |
| Dimensions | 75 |
| For safety clamps? | remove |
| Material | Brass |
| Material Seal | NBR |
| MIL-spec | MIL A-A-59326A |
| Norm | EN 14420-7 DIN |
| Outer diameter | 75 |
| Size | 75mm |
| Size | Camlock E300 |
| To Fit Hose Size | 75 mm |
| Type | Camlock E |
| Type 2 | Camlock Male with Hose Nozzle |
| Work pressure | 9 bar |
| Also found under | |
| Camlock Fittings | Camlock Fittings Type E | |
The camlock coupling type E is the male part with a hose tail of the camlock system. This version is in brass, coupling size 3" - DN75 - E300. Any female part of the same size couples onto this male part: a type B, C or D, or a DC dust cap.
Brass suits water, compressed air and mildly aggressive media, and runs smoothly in the cams. This coupling is made to EN 14420-7, MIL A-A-59326A and therefore mates with camlock parts from any other manufacturer in the same size. Working pressure is 9 bar at ambient temperature. The gasket supplied with it is NBR and suits oils, fuels and hydrocarbons.
See the full range on our camlock couplings page.
